WRO 300 Technical Updates

WRO 300 Procedures

GambroServiceTools_43.zip 
This file can be used in conjunction with Technical Updates 10056, 10065, 10081, and 10099 which introduces the release of 4.3 software for the WRO300. This Zip file contains the GWD 1.0 and 2.0 Software Upgrade programs and the GXP Preset files for the 2.1, 3.2, 4.1, 4.2 and 4.3 software versions, as well as a new USB cable driver. Note that each Update listed above has its own software-specific version of this Zip file embedded within it. This distribution differs from its predecessors as it establishes new Preset values for the 4.2 and 4.3 software versions.
TAA.TU.10100A WRO300H 4.3 Software Release and Custom Presets for GXP
This update announces the release of the WRO300H with version 4.3 software. In this update the author presents some features of the software and important Preset values to be managed for the Heat model of the WRO300.
WATER-10038A WRO300 Software Version 2.1 Upgrade
This update presents the release of version 2.1 software. This software improves the control of the inlet water valve by adding a dynamically adjusted time delay for the control of the inlet water valve, replacing the fixed time delay in previous version.
WATER-10056A WRO300 Using GWD and GXP - Using Custom Preset Files
GWD and GXP are software programs for your PC that allow you to update and manage the software in the WRO300. GWD is used to update software versions and GXP is used to manage (update/modify) the operational presets of the machine. In this update the author demonstrates how to install and use these two Gambro programs.
WATER-10064A WRO300 4.1 Software Features and Benefits
With the release of the 4.x series software several new features were made available on the WRO300. This update presents the 4.1 version software and describes the new features and benefits available, as well as a couple of new alarm messages.
WATER-10065A WRO300 4.1 Custom Presets for Use with GXP
This update presents the 4.1 version software Presets for the WRO300. It includes instructions for downloading a Zip file with all the GXP files you need to update your machine. It also includes a handy table identifying relative Presets and their values.
WATER-10068A WRO300 Chemical Pump Calibration
When relocating the chemical pump from the front panel to the lower frame, it may be necessary to calibrate the pump to get it to draw up the correct amount of chemical during the chemical intake phase of a disinfection procedure. This update presents a basic calibration procedure to accomplish this task.
WATER-10072A WRO300 Use of Minncare and the Central Chem Protocols
The use of Minncare in the Central Chem program of the WRO300 has now been approved. Using this feature, disinfectant solution produced by the WRO unit can be forwarded into the dialysis machine connected to the product water line of the WRO unit. This update provides a procedure for setting up the WRO and the Phoenix to accomplish this.
WATER-10078A WRO300 Conductivity Calibration
There have been a number of methods for calibrating the Conductivity Cells of the WRO300 since its inception. This update presents and clarifies the current method of calibration in a simple procedure. It should be used an an addendum to the service manual, replacing any previously published conductivity calibration procedures.
WATER-10081A WRO300 4.2 Software Release and Custom Presets for GXP
This update presents the release of version 4.2 software and the new Alarms and Presets available for the WRO300. It includes instructions for downloading a Zip file with all the GXP files you need to update your machine, as well as a handy table for recording Presets and their values.
WATER-10090A WRO300 Updated Installation Procedure
A new installation procedure and checklist have been released for the WRO300. This update includes a copy of the new procedure and checklist, for your convenience.
WATER-10099A WRO300 4.3 Software Release and Custom Presets for GXP
This update announces the release of version 4.3 software for the WRO300. It also introduces new part numbers for the CPU board, Display, and GXP cable. It includes instructions for downloading a Zip file with all the GXP files you need to update your machine, as well as a handy table for recording Presets and their values. There is also a procedure for installing USB drivers for the new CPU board to connect to GXP.